Many ebikes today come with rear-wheel hub drive motors and a wire that feeds through one side of the rear axle, making it difficult to install traditional foot pegs onto the rear axle. We've designed customized foot pegs for these ebikes that include a slot cut out on one side so the peg doesn't get in the way of the wire. These pegs are also threaded so they can be screwed right onto the axle without requiring an axle-nut to tighten them down.
- Threaded pegs eliminating the need for axle nuts
- Available in two size: M12 x 1.25 for ebikes for12mm diameter axles and M14 x 1.5 for 14mm diameter axles
- ebike cut-out slot on one peg to feed the power wire through
"The Bikeseat has proven to be an excellent kit to electrify a bicycle. I used it on an electric Bosch bike and was able to put 600WH of batteries inside + all the electronics. It is a clean kit that can literally be mounted to any bike, all you need to add to the bike is the motor and the throttle and anyone is good to go!"
- Ivy Sur Seine, FRA
Free Shipping for all orders in the US!
If you're not sure what the size of your axle is, we've put together a sheet you can print to match up with your axle and verify the size.
If you're still unsure of the axle sizing on your bicycle, please consult with the manufacturer's website or send us an email and we can do some research for you.
eBike Foot Pegs Include:
Visit our Ebike Compatibility Guide to determine whether or not your ebike is compatible with Companion Bike Seat.